Encore ENDSS-R4D8 Manuale Utente Scaricare il pdf (Pagina 68)

ENDSS-4C8

3.9.4.2 RS-485

The DVR uses the RS-485 standard for PTZ communication. The following settings

must be configured in parallel with the local settings of the camera for the system to

function properly.

Baudrate

Select a baud rate: 1200, 1800, 2400, 4800, 9600, 14400, 19200, 38400, 57600 or

115200.

Databit

Select a data bit communication protocol: 8-bit or 7-bit

Parity

Select a parity configuration: Odd, Even, or No Parity

Stopbit

Select a stop bit configuration: 1 Stopbit or 2 Stopbit

NOTE Pan/Tilt/Zoom and RS-485 Settings may vary for each camera. Be

sure to match local camera settings to those you input on the DVR.

3.9.4.3 Keyboard

Keyboard Model

Select the keyboard model you are using: OFF (if there is no keyboard), CK101,

CK201, KB-KT301

Keyboard ID

Adjusts the identification number based on the local settings of your keyboard. This

value may be any number from 1 to 16.

Keyboard Protocol

Provides options for the keyboard communication protocol: Pelco P, Pelco D, Teleview

Pelco P, Teleview Pelco D, Merit LILIN (3B), Merit LILIN (7B), HiSharp, Nicecam and

Elitar. This setting depends on the keyboard model being used.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 131 132

Nessun commento

Encore ENDSS-R4D8 Manuale Utente Pagina 68